Specification Chart ELC 8 LP
Dimension (LxWxH) in mm 610 x 500 x 535
Weight 70 kg.
Pump Flow Rate 2 LPM at 50 Hz.
Power Consumption 250 W
Input Power Supply 3 Phase 440 V/ Single phase 220 V (Optional)

Don't use sunlight to check your oil purity! The PC9001 gives you direct particle counts and ISO codes online and your PC/handheld device.

Instantly spot contamination level changes and avoid system damage.

The PC9001 allows your preventive maintenance to be planned with real time hard data.

Adapts itself to trend monitoring through RS232/analog outputs via laptop.

Direct printout option.

Can transfer the data via bluetooth and GSM.

Moisture in oil is the biggest enemy of hydraulic & lubricating oils ... even bigger than particulate contamination

There is a clear nexus between presence of moisture and acid / sludge formation in oil. Now with the Moisture Detector, users have a quick, accurate & simple solution to measure moisture in oil.

Displays moisture in ppm and saturation level in percentage.

Principle of operation: Capacitance

Integration with Vacuum Dehydrator and Electrostatic Liquid Cleaner -

A Moisture Sensor installed in the Vacuum Dehydration Unit switches on the Dehydrator and the Electrostatic Cleaner automatically.

Now with early detection integrated, users have a formidable productivity enhancing solution

Water glycol fluids consist of a solution of water, ethylene or diethylene glycol, a high molecular weight polyglycol and an additive package.

The water-to-glycol mixture typically contains 38 to 45 percent water. These fluids usually contain red or pink dye to aid in their identification.

With water in the fluids' formulation, evaporation is ongoing and upper operating temperature limits must be considered.

Checks must be made periodically of the water content. The fluids' typical operating temperatures should be kept below 150째.

APPLICATION

Diecasting Machines
Coke Furnace Door Openers
Ladle-tilting Mechanisms
Furnace Chargers and, Dischargers,
Basic Oxygen Furnace Hydraulics
Fork Lifts
Straddle Trucks
Electric Welders,
Rod, Tube and Strip Mills,
Hot Metal Shears,
Aircraft Carrier Catapults,
Airport Air Bridges and
Continuous Metal Casters.

System for contamination control & maintenance of EHC fire resistant fluids (Phosphate Ester)

Ferrocare now offer solutions for Phosphate Ester fluid maintenance. Remove 100% of contaminants and restore fluid systems to peak performance, including the resistivity requirements.

Remove & maintain acid number to < 0.1 mg KOH/gm with ICB element

Eliminate Servo Valve Sticking

Maintain moisture at 300 ppm and reduce acid levels build up.

Integrated TMR (Nitrogen generator) removes oxygen and combustible dissolved gases

Remove particulate & insoluble gel / sludge, with high efficiency.

Standard in-line filters mostly filter down to 20 micron efficiently. the most harmful contaminants in oil are sun 5 micron particles, these are also the most abrasive. The Hippo filter is capable of removing harmful soild contaminants down to 3 micron.

FEATURES:

Eliminates water from oil using cellulose elements
Eliminates oil from water using polyproylene elements
Does not remove additives packages
Extends oil drain intervals
Increases service intervals
Provides continuous protection
Environmentally friendly
Reduce machine downtime
Removes dirt and soild contaminants down to NAS 5/ISO 14/9 or better